Calling Party SCCP Address Configuration for Requests

You can configure the calling party SCCP address for request messages.

Sample Calling Party SCCP Address Configuration

Calling Party SCCP Address Parameters lists the configuration parameters for configuring the SCCP calling party address to use in request messages, such as the following:
  • MAP call out requests.
  • USSD notifications.
  • MATRIXX-initiated call requests for USSD callbacks.

You can configure multiple SCCP addresses, where each SCCP address is based on the called global title.

Table 1. Calling Party SCCP Address Parameters
Parameter Description Default Value
SCCP Address Specifies the SCCP address type to use in the request message. Valid values are:
  • pc — To specify a point code as the SCCP address.
  • gt — To specify a global title as the SCCP address.

create_config.info question: Engine 1:Cluster 1:LogicalBlade 1:What SCCP address should be used for requests from this blade (pc/gt)?

gt
GT Type Specifies the global title type to use. Valid values are as follows:
  • 1 — Use digits and nature of address.
  • 2 — Use digits and translation type.
  • 3 — Use digits, translation type, and numbering plan.
  • 4 — Use digits, translation type, numbering plan, and nature of address.

create_config.info question: Engine 1:Cluster 1:LogicalBlade 1:What is the SCCP global title type for requests from this blade?

4
GT Digits Specifies the global title digits to use. You must specify a string of digits.
Important: You must specify a valid global title. Do not accept the default value.

create_config.info question: Engine 1:Cluster 1:LogicalBlade 1:What are the SCCP global title digits for requests from this blade?

12345678
GT Nature of Address Specifies the nature of address of the global title. Specify a value in the range 0 to 127:
  • 0 — Unknown
  • 1 — Subscriber
  • 3 — National
  • 4 — International
  • All other values are spare or reserved.

create_config.info question: Engine 1:Cluster 1:LogicalBlade 1:What is the SCCP global title nature of address for this blade?

4
GT Translation Type Specifies the global title translation type. Specify a value in the range 0 to 255.

create_config.info question: Engine 1:Cluster 1:LogicalBlade 1:What is the SCCP global title translation type for requests from this blade?

1
GT Numbering Plan
Specifies the numbering plan of the global title. Specify a value in the range 0 to 15:
  • 0 — Unknown.
  • 1 — ISDN/telephony numbering plan (ITU-T E.163 and E.164).
  • 2 — Generic numbering plan.
  • 3 — Data numbering plan (ITU-T X.121).
  • 4 — Telex numbering plan (ITU-T F.69).
  • 5 — Maritime mobile numbering plan (ITU-T E.210, E.211).
  • 6 — Land mobile numbering plan (ITU-T E.212).
  • 7 — ISDN/mobile numbering plan (ITU-T E.214).
  • All other values are spare or reserved.

create_config.info question: Engine 1:Cluster 1:LogicalBlade 1:What is the SCCP global title numbering plan for requests from this blade?

1
Point Code If SCCP Address is set to pc, specifies the point code to use in the SCCP address.

create_config.info question: Engine 1:Cluster 1:LogicalBlade 1:What is the SCCP point code for requests from this blade?

402
SCCP SSN The SCCP sub-system number (SSN) to use for MAP callouts.

create_config.info question: Engine 1:Cluster 1:LogicalBlade 1:What is the SCCP sub-system number for MAP call outs from this blade?

147
Number of Additional SCCP Addresses The number of other required calling party SCCP addresses on a per- SCCP-called global title basis for MAP callouts and call initiation attempts.

create_config.info question: Engine 1:Cluster 1:LogicalBlade 1:How many additional SCCP addresses does this blade require for requests?

0
If you set the required number of other calling party SCCP addresses to 1 or more, then the following questions are asked per SCCP address.

Engine 1:Cluster 1:LogicalBlade 1:SccpAddress1:What destination SCCP GT prefix is this address for?

Engine 1:Cluster 1:LogicalBlade 1:SccpAddress1:What destination SCCP global title type is this address for?

Engine 1:Cluster 1:LogicalBlade 1:SccpAddress1:What destination SCCP global title nature of address is this address for?

Engine 1:Cluster 1:LogicalBlade 1:SccpAddress1:What SCCP address should be used for requests from this blade (pc/gt)?

Engine 1:Cluster 1:LogicalBlade 1:SccpAddress1:What is the SCCP global title type for requests from this blade?

Engine 1:Cluster 1:LogicalBlade 1:SccpAddress1:What are the SCCP global title digits for requests from this blade?

Engine 1:Cluster 1:LogicalBlade 1:SccpAddress1:What is the SCCP global title nature of address for requests from this blade?

Engine 1:Cluster 1:LogicalBlade 1:SccpAddress1:What is the SCCP global title translation type for requests from this blade?

Engine 1:Cluster 1:LogicalBlade 1:SccpAddress1:What is the SCCP global title numbering plan for requests from this blade?

Engine 1:Cluster 1:LogicalBlade 1:SccpAddress1:What is the SCCP sub-system number for MAP call outs from this blade?

Engine 1:Cluster 1:LogicalBlade 1:SccpAddress1:What is the SCCP sub-system number for MATRIXX initiated calls from this blade?
Call Initiation SCCP SSN The SCCP sub-system number (SSN) to use for MATRIXX initiated calls, for example for USSD call back.

create_config.info question: Engine 1:Cluster 1:LogicalBlade 1:What is the SCCP sub-system number for MATRIXX initiated calls from this blade?

146