Usage Trigger Gy and 5G AVPs

You trigger re-authorization for a session or rating group by assigning the Diameter Gy Trigger-Type and 5G triggerType AVP values listed here to usage trigger profiles.

The Diameter Gy list reflects the acceptable values for the Gy Trigger-Type AVP as specified in 3GPP TS 32.299. They are listed by string in the My MATRIXX user interface, and they are listed here with their Diameter message reference numbers:
  • 1: CHANGE_IN_SGSN_IP_ADDRESS
  • 2: CHANGE_IN_QOS
  • 3: CHANGE_IN_LOCATION
  • 4: CHANGE_IN_RAT
  • 5: CHANGE_IN_UE_TIMEZONE
  • 10: CHANGEINQOS_TRAFFIC_CLASS
  • 11: CHANGEINQOS_RELIABILITY_CLASS
  • 12: CHANGEINQOS_DELAY_CLASS
  • 13: CHANGEINQOS_PEAK_THROUGHPUT
  • 14: CHANGEINQOS_PRECEDENCE_CLASS
  • 15: CHANGEINQOS_MEAN_THROUGHPUT
  • 16: CHANGEINQOS_MAXIMUM_BIT_RATE_FOR_UPLINK
  • 17: CHANGEINQOS_MAXIMUM_BIT_RATE_FOR_DOWNLINK
  • 18: CHANGEINQOS_RESIDUAL_BER
  • 19: CHANGEINQOS_SDU_ERROR_RATIO
  • 20: CHANGEINQOS_TRANSFER_DELAY
  • 21: CHANGEINQOS_TRAFFICE_HANDLING_PRIORITY
  • 22: CHANGEINQOS_GUARANTEED_BIT_RATE_FOR_UPLINK
  • 23: CHANGEINQOS_GUARANTEED_BIT_RATE_FOR_DOWNLINK
  • 24: CHANGEINQOS_APN_AGGREGATE_MAXIMUM_BIT_RATE
  • 30: CHANGEINLOCATION_MCC
  • 31: CHANGEINLOCATION_MNC
  • 32: CHANGEINLOCATION_RAC
  • 33: CHANGEINLOCATION_LAC
  • 34: CHANGEINLOCATION_CELLID
  • 35: CHANGEINLOCATION_TAC
  • 36: CHANGEINLOCATION_ECGI
  • 40: CHANGE_IN_MEDIA_COMPOSITION
  • 50: CHANGE_IN_PARTICIPANTS_NMB
  • 51: CHANGE_IN_THRSHLD_OF_PARTICIPANTS_NMB
  • 60: CHANGE_IN_SERVICE_CONDITION
  • 61: CHANGE_IN_SERVING_NODE
  • 62: CHANGE_IN_ACCESS_FOR_A_SERVICE_DATA_FLOW
  • 70: CHANGE_IN_USER_CSG_INFORMATION
  • 71: CHANGE_IN_HYBRID_SUBSCRIBED_USER_CSG_INFORMATION
  • 72: CHANGE_IN_HYBRID_UNSUBSCRIBED_USER_CSG_INFORMATION
  • 73: CHANGE_OF_UE_PRESENCE_IN_PRESENSE_REPORTING_AREA
  • 74: CHANGE_IN_SERVING_LMN_RATE_CONTROL
  • 75: CHANGE_IN_APN_RATE_CONTROL
  • 76: CHANGE_IN_3GPP_PS_DATA_OFF

You can assign these 5G triggers to your usage trigger profiles to trigger re-authorization for a session or rating group. They are listed by string in the My MATRIXX user interface, and they are listed here with their Diameter message reference numbers. This list is a subset of the list of trigger type profiles from 3GPP TS 32.225 5G data connectivity domain charging; stage 2:

  • 1: QUOTA_THRESHOLD
  • 2: QHT
  • 3: FINAL
  • 4: QUOTA_EXHAUSTED
  • 5: VALIDITY_TIME
  • 6: OTHER_QUOTA_TYPE
  • 7: FORCED_REAUTHORISATION
  • 8: UNIT_COUNT_INACTIVITY_TIMER
  • 9: ABNORMAL_RELEASE
  • 10: QOS_CHANGE
  • 11: VOLUME_LIMIT
  • 12: TIME_LIMIT
  • 13: EVENT_LIMIT
  • 14: PLMN_CHANGE
  • 15: USER_LOCATION_CHANGE
  • 16: RAT_CHANGE
  • 17: UE_TIMEZONE_CHANGE
  • 18: TARIFF_TIME_CHANGE
  • 19: MAX_NUMBER_OF_CHANGES_IN_CHARGING_CONDITIONS
  • 20: MANAGEMENT_INTERVENTION
  • 21: CHANGE_OF_UE_PRESENCE_IN_PRESENCE_REPORTING_AREA
  • 22: CHANGE_OF_3GPP_PS_DATA_OFF_STATUS
  • 23: SERVING_NODE_CHANGE
  • 24: REMOVAL_OF_UPF
  • 25: ADDITION_OF_UPF
  • 26: SESSION_AMBR_CHANGE
  • 27: START_OF_SERVICE_DATA_FLOW
  • 28: GFBR_GUARANTEED_STATUS_CHANGE
  • 29: INSERTION_OF_ISMF
  • 30: REMOVAL_OF_ISMF
  • 31: CHANGE_OF_ISMF
  • 32: ECGI_CHANGE
  • 33: TAI_CHANGE
  • 34: HANDOVER_CANCEL
  • 35: HANDOVER_START