Home
MATRIXX Call Control Framework Integration
Support for Announcements
MATRIXX Call Control Framework (CCF) provides support for playing pre-call announcements. The following topics describe CCF pre-call announcement functionality and explain how to configure CCF to play announcements.
Configuring CCF to Play Announcements
Configuring Call Control Framework (CCF) to play announcements involves enabling announcements for voice services and configuring announcements pricing components.
Configuring VXML Announcements Using Normalizers
You can configure announcement strings, for the announcements you want to play, as results values in normalizers. Use this method to configure only VoiceXML (VXML) announcements.

Welcome
MATRIXX Release Notes
MATRIXX Architecture
MATRIXX Installation and Upgrade
MATRIXX Configuration
MATRIXX Security
MATRIXX Integration
MATRIXX Diameter Integration
MATRIXX Call Control Framework Integration
- About Call Control Framework Integration
  MATRIXX Call Control Framework Integration provides information about MATRIXX Call Control Framework support and configuration.
- MATRIXX Call Control Framework
  MATRIXX includes an integrated GSM Service Control Function to support call control capabilities for telephony services.
- Supported Message Sequences
  MATRIXX Call Control Framework (CCF) provides support for message sequences using the Camel Application Part (CAP) protocol.
- Configuring MATRIXX Network Enabler
  This section describes how to configure MATRIXX Network Enabler.
- Configuring CAMEL Gateway
  CAMEL Gateway is a CAMEL Application Part (CAP) server. Configure CAMEL Gateway to allow communication between MATRIXX Engine and Network Enablers through the CAP protocols.
- Configuring Routing Preferences
  Configuring routing preferences allows you to define how routes are prioritized between CAMEL Gateway on each engine and Network Enablers.
- Configuring Correlation ID Length
  Call Control Framework (CCF) supports configurable correlation ID lengths. CCF handles 10 digit correlation ID lengths by default.
- Support for CAP1
  Call Control Framework (CCF) supports the processing of roaming voice calls that use the CAP1 protocol.
- Charging for CS1 INAP Calls
  Call Control Framework (CCF) provides support for processing and applying charging for voice calls that use the CS1 INAP protocol.
- Sending Furnish Charging Information
  You can configure Call Control Framework (CCF) to send Furnish Charging Information (FCI) operations at specific points during call handling. CCF sends FCI operations to instruct the Mobile Switching Center (MSC), or service switching point (SSF), to add charging information to the call data record (CDR) for a call.
- Support for MT Call Forwarding
  When handling a mobile terminating (MT) call, Call Control Framework (CCF) can forward the call to another number if the call is not answered, or the called number is busy.
- TCAP Handover and Relay Configuration
  Call Control Framework (CCF) can handover (relay) incoming TCAP requests for subscribers that MATRIXX cannot find in its subscriber database to another platform for processing. For example, when migrating to the MATRIXX platform, CCF can relay incoming TCAP requests to the incumbent platform for subscribers that have not yet been migrated across. After handover, the incumbent platform processes the TCAP request without any further involvement with MATRIXX.
- Support for Announcements
  MATRIXX Call Control Framework (CCF) provides support for playing pre-call announcements. The following topics describe CCF pre-call announcement functionality and explain how to configure CCF to play announcements.
  - Pre-Call Announcement Functionality
    Call Control Framework (CCF) pre-call announcement functionality enables you to play announcements to the caller before connecting them to the dialed number.
  - PACUI Announcements
    Call Control Framework (CCF) can send the list of announcements to play to the announcement pod using a PromptAndCollectUserInformation (PACUI) operation to allow information to be collected from the caller and used during call processing.
  - Playing Balances in Announcements
    Play balance information to the subscriber during announcements, for example, to tell the subscriber when their balance is low.
  - Announcements Limits in TCAP Messages
    Call Control Framework (CCF) sends the list of announcements to play to the subscriber in a TCAP message containing either a maximum of three PlayAnnouncement operations or one PromptAndCollectUserInformation (PACUI) operation.
  - Announcements Pricing Validation
    Before loading pricing, the Price Loader validates the list of announcements in the selected PostRating profile to check that the announcement limits are not exceeded.
  - Configuring CCF to Play Announcements
    Configuring Call Control Framework (CCF) to play announcements involves enabling announcements for voice services and configuring announcements pricing components.
    - Enable Announcements For a Voice Service
      Perform this task to enable Call Control Framework (CCF) to play announcements for a specific voice service, and to configure announcement behavior for the voice service.
    - Announcements Components
      MATRIXX Engine uses announcement pricing components for determining the list of announcements to play to a subscriber during a voice call, and the language they must be played in. You configure announcement data to be dynamic, so a different result occurs based on conditions that are valid at the time of rating.
    - Configuring VXML Announcements Using Normalizers
      You can configure announcement strings, for the announcements you want to play, as results values in normalizers. Use this method to configure only VoiceXML (VXML) announcements.
      - Announcement Strings
        During pricing configuration, you can configure an announcement string as a results value in a normalizer. The announcement string is copied to the ServiceInfo.VcsInfo.Announcement field in the MtxDiamRoMsg MATRIXX Data Container (MDC). MATRIXX Call Control Framework (CCF) can construct TCAP PlayAnnouncement operations based on the information in the ServiceInfo.VcsInfo.Announcement field.
      - Configure Announcement Strings Using Normalizers
        Perform this task to configure an announcement string as a results value in a normalizer. The announcement string defines the announcement pod on which to play announcements and the IDs of the announcements to play.
    - Announcements Fields in VcsInfo
      MtxDiamRoMsg VcsInfo Announcement Fields lists the announcements-related fields held in the MtxDiamRoMsg MATRIXX Data Container (MDC) in the ServiceInfo.VcsInfo field.
    - Announcement MDCs
      Camel announcement MATRIXX Data Containers (MDCs) include MtxAnnouncementServerConnectionData, MtxAnnouncementValueData, MtxAnnouncementVariableValueData, and MtxAnnouncementPromptCollectData.
- Support for USSD Services
  Call Control Framework (CCF) supports making Mobile Application Part (MAP) Unstructured Supplementary Service Data (USSD) call out requests to deliver USSD notifications to a subscriber. CCF also supports USSD services for queries, call back, and interactive menus using MAP-Process-UnstructuredSS-Request messages, and MAP-UnstructuredSS-Request messages.
- Announcements (IVR) and USSD Menus
  Call Control Framework (CCF) provides support for menu driven announcements using IVRs and interactive USSD service menus that give subscribers options for retrieving and updating their balances and account details.
- Apache FreeMarker Template Configuration
  You can configure Apache FreeMarker templates for handling Call Control Framework (CCF) services such as Unstructured Supplementary Service Data (USSD) query and call back services, and menu services using announcements or interactive USSD menus.
- Mobile Application Part (MAP) Call Outs
  MATRIXX Call Control Framework (CCF) provides support within the Charging Server for making MAP call out requests to an external platform in response to TCAP or Diameter messages that require them.
- Extending MAP Callouts
  You can extend the data used in Mobile Application Part (MAP) callout requests and results. You can include customized private extension data in the extensionContainer parameter in MAP ATI (AnyTimeInterrogation) and MAP SRI (SendRoutingInfo) operations. This feature enables you to manipulate the data sent and returned in MAP callouts, for example, to correct the digits dialed by a user when roaming.
- LDAP Callout Service
  Call Control Framework (CCF) provides support for making Lightweight Directory Access Protocol (LDAP) call out requests to an LDAP server in response to TCAP or Diameter messages that require them.
- Callout Response Data MDCs
  Call Control Framework (CCF) holds response data for Mobile Application Part (MAP) callouts and Lightweight Directory Access Protocol (LDAP) callouts for a call or a session in MATRIXX Data Container (MDC) format.
- Appendixes
MATRIXX TM Forum Integration
MATRIXX 5G Integration
MATRIXX 5G Event Streaming
MATRIXX Event Streaming
MATRIXX Administration
MATRIXX Web App Administration
MATRIXX Monitoring and Logging
MATRIXX Policy
MATRIXX Kafka CDR Consumer
MATRIXX Pricing and Rating
MATRIXX Pay Now
MATRIXX Subscriber Management
MATRIXX Subscriber Management API
MATRIXX Business API SDK
My MATRIXX Help
MATRIXX Backoffice Customer Tool Help
MATRIXX Third-Party Licenses
Glossary

Configuring VXML Announcements Using Normalizers

You can configure announcement strings, for the announcements you want to play, as results values in normalizers. Use this method to configure only VoiceXML (VXML) announcements.